Quote:
Originally Posted by Tom Vaught
Ok Charlie, I posted the Picture for you so now tell us about the parts you made.
Tom V.
|
Ok Tom here's a description...
There are 2 power valves in the back of the picture that I learned on while trying to develop making them work correctly . Basically I could use them but the one I have in the carburetor now is the most evolved one out of the 3 made. You know how that deal goes as your designing something you find that things need to be changed to make the piece your building work better.. Also in the back but in the middle, there are 2 adjustable spring caps with copper fuel inlets extensions soldered on for use in the back bowl if I decided to use a power valve in the back. I never actually used them .. The 3 caps in the middle 2 are adjustable ones for the front bowl. I have 1 turned around so you can see the inside. The other one is just a non adjustable one. Then there's the cap that I cut threads into so it could be threaded on to the power valve . To the right of that you can see the installation tool I made for pressing in the spring caps with a little bit of loc-tight on the cap to help hold it in place. I even knurled the handle for grip.. Then lastly are the hold down studs with the holes drilled in them for the signal . 1 is made of stainless and the other one of brass. I made the brass one because I thought it would be cool and would most likely be the only guy with one . I like having 1 off things... those are 6' long and 3/8 in diameter ...