remy, I took several pix of my '64 headlight assemblies before sending them off. I did not break them down entirely, my purpose was to retain the headlamps since 2 are T-3s which I suspect are original date code correct (one high beam, one low beam). Not sure if I captured the view you would like to see.
I'll start with these 2 pix. You can see the springs and on the back side, you can see the rivet head. I did not make note how the spring is physically attached in their respective "pockets".
Hope this helps. Let me know if you want to see another area, I can check if I have it.
|