Quote:
Originally Posted by TedRamAirII
So with Squids System, seems like you could just split your supply line at the injector unit and feed it from both sides? if that is even needed? I suppose not. That would be easier than re-plumbing the system with a return line. If its made like I think it is, there will be very little, if any "pressure drop" on the 4 injectors, or even 8 if used.
|
Agree, leave it alone. For that system it will work fine the way it is.
ALSO you are dumping in to a plenum, not a single runner so there is some "sharing" of fuel going on there too.
My post had info for the average guy considering EFI, not TBI, injection and why the ability to tune individual injectors becomes important with Single Runner intakes, Batch Fire injection systems (what you have) dumping into a plenum is a different story.
Tom V.
I like system #3 on high performance systems.