If you grind a bit of a flat where the needed end holes should be you can very carefully start off and drill and tap the area for 3/8" fine thread and use studs at those 4 locations.
Be very careful when you drill the holes and use a bolted up Manifold as a guide.
Shim up the Manifold hole with Brass tubing when you drill so you stay in good alinment
when you tap leave inperfect threads so that you can't bottom out the stud on the head bolt.
__________________
Wernher Von Braun warned before his retirement from NASA back in 1972, that the next world war would be against the ETs!
And he was not talking about 1/8 or 1/4 mile ETs!
1) 1940s 100% silver 4 cup tea server set.
Two dry rotted 14 x 10 Micky Thompson slicks.
1) un-mailed in gift coupon from a 1972 box of corn flakes.
Two pairs of brown leather flip flops, never seen more then 2 mph.
Education is what your left with once you forget things!
|