[QUOTE=charlie66;5875574]Seems like you're off a tooth maybe. To not be able to idle at 30 degrees sounds wrong.
I idle mine at 8 degrees..[/QU
I'll know more when I get it in the car this week end.
This combination don't seam to be as bad as the iron head and HFT cam was.
Just don't seam to be all that responsive with the timing so low.
I didn't play as much on the test stand with this one as I did the other
combo. It's pulling 15 inch's of vacume Idles well. I started out with 20"
valve lash and tighten to 8" int-exs
GT.
|