Quote:
Originally Posted by berniearlta
I would appreciate you looking at the spread bore for me Charlie. I'm not against sending one out to be converted if it will work, or setting it up myself.
Thanks for your information Tom and 69GTO. I very much plan on doing this, its just a matter of when. I will research until I know exactly what I need and then begin to collect the parts little by little. The current build is a 10:1 462 6X-4, 041 cam. I will most likely use this bottom end with a set of 111cc + heads.
|
Ok, i looked at the carburetor and it looks pretty much the same as the square bore but it still is going to be a learning curve . I havent seen it done with one before so you would be on your own if you had specific questions with pertaining spreadbore blowthrew mods. It would be easier to change to a square bore and change your intake, but cooler to actually succeed in having the first spread bore blowthrew.. So thats something you're going to have to think about . If it was me, being i love one off stuff that knowone else has, I would try the spread bore with the mind set that it might not work out to my liking ... But then again i believe if you really want to make something happen and are willing to take the extra steps needed , you will eventually get there...