What I'm trying to determine is if:
A) I go with a 90* elbow-to-4150 adapter and a barrel-style throttle body
-OR-
B) A 4150 throttle body and a traditional air cleaner.
This is on a Hurricane/Tomahawk EFI intake-- I believe it's a copy of a Holley Street Dominator- that I'm hoping is close to stock height for carb/TB mounting.
I'm trying to fit this under the hood of a 74 Formula, so space is at a major premium.
So, if you could place a straight edge on the top of the air cleaner, then measure from the top of A/C to the carb/manifold mounting flange; and also from the top of the A/C to the center of one of the intake manifold mounting bolt holes, then let me know which bolt hole you measured-- that would be a tremendous help!
