1 - Oiling the shafts worked, they don't squeak on the car, not running. Much smoother.
Will try running it tomorrow and see if whistle is there.
Carb is back to complete stock jetting. All new gaskets - Shooter is back to 31 stock.
Oh by the way - I never backed out the screws fully on the round plates. Ever. Just 1/2 turn. Even after they were seated. I put a little loc tite red on the other side. Where threads show. Maybe it holds maybe it doesn't. Forgot if seals in absence of air or not. Then it would need the be on the actual threads as designed.
Have a good night, thanks again.
__________________
69 Gto, 390 posi gears,th400 w/jim hand converter/406 pontiac/#64 HEADS/ 10:1 compression/ 190 PSI with/ TRW 160 thou domes / hooker headers 1 7/8, PRW 1.5 rockers, 405 Crower Springs, Holley 750 vac with proform upgrade, Performer RPM on points / 284 H Single Pattern Crane
|