I did some more sandblasting to the nose to remove the paint from the back side along with sanding with a DA and block on the front of the nose working the scratches and cracks down until they looked good and all of the paint was removed leaving fresh endura material. I fixed a couple small spots with 2 part flex epoxy and block sanded smooth. I sprayed 3 coats of SPI epoxy primer with a 30 minute flash time in between coats and then sprayed a black guide coat to help when blocking. I will eventually block out and repair any issues still present then apply 3 more coats of epoxy then block again. First I need to fit the fenders and nose and add to or remove material if necessary from the nose to properly shape to the fenders.
|