Quote:
Originally Posted by JSPONT
With all do respect, 9.7 to 10.00 car is not what most are talking about here. That is an average street car now.
Street Outlaw cars can run a high 3 second pass in the 1/8, that is a 6 second 1/4.
With a Pontiac, when you are 7's and below that is a real fast race Pontiac.
This is the race section. I have no dog in this fight but the plumber's car you speak of runs 7's. Few on here should comment unless you are one of the elite. That is just my feeling, so I have no comment on what head is the best. Each head manufacturer has some fast cars.
|
Actually that is the exact range of ET that we should be looking at
Way back a set of head was pulled and a set of CV-1 were installed and the car ran slower. That was the start of the P & G show which continues to this day. With the claim port velocity was the reason the car ran slower.
I am sure others will add or post up different versions of these events.
Stan
__________________
Stan Weiss/World Wide Enterprises
Offering Performance Software Since 1987
http://www.magneticlynx.com/carfor/carfor.htm
David Vizard & Stan Weiss' IOP / Flow / Induction Optimization - Cam Selection Software
http://www.magneticlynx.com/DV
Download FREE 14 Trial IOP / Flow Software
http://www.magneticlynx.com/DV/Flow_..._Day_Trial.php
Pontiac Pump Gas List
http://www.magneticlynx.com/carfor/pont_gas.htm
Using PMD Block and Heads List
http://www.magneticlynx.com/carfor/pont_pmd.htm