There A...B...C...& D ways to go...like everything else in this world. But may 2,500.00 for paint and materials.....Paint stripper,razor blades, red scuff pads, 80...180 ..400 DA paper....220 wet or dry paper....grinding discs, 80 grit board paper, body filler, etch primer or epoxy primer. High build primer, can of guide coat, rice cakes, carbide bits, drill bits, car cover plastic, masking paper, seam sealer, dust masks,paint mask,paint suit, cut off wheels, mig gas and wire, torches, tack rags, 3/4 inch tape, 2 inch tape , stud pins for dent pullah, polyester putty, safety mask for grinding, body cavity wax,undercoating, then your paint ....and your clear, then 1000 ,1500,2000,3000 sand paper, buffing pads..buffing compound, micro pads and other polishes, micro fiber towels, spray gun cleaner, wax and grease remover, final wash solvent, shop wipes,alcohol wipes, some quiet pads, sand blast media, ....iam sure I forgot something...
P
|