Quote:
Originally Posted by torqhead
Not trying to be a jerk or controversial, but I'm not sure pulling a motor is the best option to find a noise, that's time and money.
Another question that may have been answered, was the shim installed behind the flexplate before it was bolted to the crank?
|
I installed the flexplate and do not recall a shim.
Quote:
Originally Posted by AG
I doubt the flexplate has anything to do with that noise. Does the sound increase with RPM?
|
Based on a video clip I found on-line, a cracked flexplate can make a similar sound. https://m.youtube.com/watch?v=A3mUQG1oGfo
Why do you doubt that this maybe the issue?
__________________
Will Rivera
'69 Firebird, 400/461, 290 Eddy D-Ports, HR 230/236, 4l80E, 8.5 Rear, 3.55 gears
'69 LeMans Vert, XS 350, #47 heads, TH400, 10 Bolt 3.23 gears, work in progress
‘66 Lemans, 455, 310 KRE D-Ports, HR 236/245, TH400, GV OD, 12 bolt 3.73 gears - see it here:
https://youtu.be/RP_s1wJKm_Y?si=K0NZxoTyaGcj8Dcb
Last edited by grivera; 09-18-2018 at 08:59 PM.
|