Quote:
Originally Posted by "QUICK-SILVER"
Did you have the engine running when you was working the wheel back and forth?
If the pump is making pressure it should push all the air out of the lines and box when you work the steering wheel.
Running setting still (no steering wheel turn) the relief valve in the pump opens up. Then turning the steering wheel opens valves and lets the pressure go through the box. Should only take a minute for the pump to push the air out while you work the steering wheel.
Clay
|
I've tried it both ways, with the motor off and with it running. I'm still not getting anything. I checked inside the reservoir with the motor running and I see no fluid movement. I'm gonna take the valve out today and see of maybe I put the piston in backwards. Or I"ll replace it with the one from the new pump and see if that works.