Thread: Oil filter
View Single Post
  #2  
Old 02-16-2019, 02:33 AM
ponyakr's Avatar
ponyakr ponyakr is offline
Ultimate Warrior
 
Join Date: Dec 2011
Location: North Louisiana
Posts: 7,621
Default

Some are using the smaller LS type filters.

The 1042 NAPA/51042 WIX is about 3" wide & 3 1/2" long.

https://www.napaonline.com/en/p/FIL1042

https://www.oreillyauto.com/detail/b.../51042/4835458

If you can stand 3.8" long, you can use the K&N HP-1007. with the nut on the end.

https://www.summitracing.com/parts/knn-hp-1007

If you can use the 4.5" length, but just need the smaller 3" width, you can use the NAPA 1522/WIX 51522.

https://www.napaonline.com/en/p/FIL1522

https://www.oreillyauto.com/detail/b.../51522/4835826

Here's an oil filter cross reference chart that shows similar filters in other brands.

https://www.oilfilter-crossreference...vert/Wix/51522

The K&N is an HP-2006. But with the nut, it's over 4.75" long.

https://www.summitracing.com/parts/k...hoCiKcQAvD_BwE


Last edited by ponyakr; 02-16-2019 at 03:04 AM.