View Single Post
  #23  
Old 03-27-2019, 12:12 PM
TCSGTO's Avatar
TCSGTO TCSGTO is offline
Ultimate Warrior
 
Join Date: Dec 2000
Location: Warren,Ohio,USA
Posts: 1,686
Default

I've had a Ignitor III module with a rev limiter for 5 or 6 years and it has worked well but is currently being replaced with a set of points and separate rpm limiter. I'll be using the Accel 32oz. point set.

Even with a good timing chain and the Sims mod timing is starting to jump around at idle and act erratic, and its not because of weak springs. I never noticed any performance gain with the module but liked the fact it had the built in limiter.

__________________
68 GTO,3860#
Stock Original 400/M-20 Muncie,3.55’s
13.86 @ 100
Old combo:
462 10.75 CR,,SD 330CFM Round Port E's,Old Faithful cam,Jim Hand Continental,3.42's.
1968 Pontiac GTO : 11.114 @ 120.130 MPH

New combo:
517 MR-1,10.8 CR,SD 350CFM E's,QFT 950/Northwind,246/252 HR,9.5” 4000 stall,3.42's
636HP/654TQ
1.452 10.603 @ 125.09
http://www.dragtimes.com/Pontiac-GTO...lip-31594.html