Quote:
Originally Posted by Sun Tuned
This was not designed to be a pertronix bashing thread.
I'd say 95% of failures are due to bad grounds on these things.. and as much as everyone thinks their car is top shelf I bet I could have a field day with a volt/on meter checking things that have gotten out of kilter in 50 years.
Most of the ground connections on these cars need serious attention. The reality of this is most never consider it unless there is a problem that warrants checking and correcting it. Not to mention with updated engines brings "lost" or "forgotten" ground straps.
Based off the nice email "Frank" sent me, wewill check into this and see what we got. Just generally saying a pertronix is a piece of junk without any scientific testing to back that statement up is just
Being opinionated and naive. The real questions that need answers are is it a piece of crap due to a faulty design? Or is it actually due to fundamental basic issues that keep a decent product from doing its job because the "basic" setup is inherently riddled with problems not due to the pertronix?
I'm betting a good 90% of the failures most have had are due to electrical problems elsewhere that really needed addressing even before the points were pulled in the first place.
|
You wouldn't believe (well, maybe with your experience, you would) how many "carburetor problems" I have solved over the years simply by taking a battery jumper cable, and connecting one end to the ground terminal of the battery, and the other end to a cylinder head bolt, after first wire-brushing off the paint on the head bolt !
Jon.
__________________
"Good carburetion is fuelish hot air".
"The most expensive carburetor is the wrong one given to you by your neighbor".
If you truly believe that "one size fits all" try walking a mile in your spouse's shoes!
Owner of The Carburetor Shop, LLC (of Missouri).
Current caretaker of the remains of Stromberg Caburetor, and custodian of the existing Carter and Kingston carburetor drawings.
|