Does your rotor point at either 1 or 6 when it's on the timing tab now?
I have a relative that's really good at building cars..has built many from the ground up. He also sets his timing by feel. He does good most of the time but every now and then I need to help him.
My sons car had a weak starter so my father inlaw thought it it had too much timing and backed it off so it would start easier.Saw my son a day later he said his car was running like crap. Once I found out what happened ..stuck the timing gun on it and found only 4 degrees inital..where normally it was at 18..huge difference.
__________________
466 Mike Voycey shortblock, 310cfm SD KRE heads, SD "OF 2.0 cam", torker 2,generic one inch open spacer
373 gears 3200 Continental Convertor
best et 10.679/127.5/1.533 60ft
308 gears best et 10.76/125.64/1.5471
Last edited by ta man; 04-07-2019 at 09:39 PM.
|