Cam looks installed dot to dot. So if you rotate the engine to 10 degrees BTDC is your rotor pointing at number 1?
I can bet it points at 2. If the vacuum can is jammed against the intake and can't move anymore that may be a clue.
__________________
466 Mike Voycey shortblock, 310cfm SD KRE heads, SD "OF 2.0 cam", torker 2,generic one inch open spacer
373 gears 3200 Continental Convertor
best et 10.679/127.5/1.533 60ft
308 gears best et 10.76/125.64/1.5471
Last edited by ta man; 04-09-2019 at 11:02 AM.
|