Quote:
Originally Posted by Tomslemans67
Just remember by dipping parts there are going to be areas you will never get a new coating back on. There for it will be raw metal. I don't think acid dipping is the way to go. There is other dipping ways besides using acid!
|
I’m not dipping anything that I can’t coat thouroughly with anti rust. Eastwood has that fogged nozzle that you hook to there anti rust coating. I was gonna put it in holes in the trunk lid between the seams and the same on the hood and fog it all over and turn the part and do it again and again as I rotate the part. You really think rust will be an issue after that. For that matter I could take a gallon of rustoleum and just pour it in the seam acces holes and shake the hood and trunk around until it’s coated then just let the body man get the excess off the outside before painting. Do these not sound like good ideas