63/4 you could get the standard clutch/brake set up or an H/D pedal assembly used in Borg&Beck pressure plates. The H/D set had a large green spring on the right side of the underdash bracket, however some guys removed the spring.
I believe the 63 pedal may be shaped differently from 61/2 but may work.. not sure, but watch the brake pedal cause there is a difference between P/B and standard brakes. I didn’t know that and struggled for a year trying to get brakes squared away. A 61/2 clutch pedal will bolt right up to your under dash bracket and will work fine. Brad @ Fabcraft in TX sells these and he can get you on the right path with whatever u need.
Hope this is some help.
|