Quote:
Originally Posted by Stan Weiss
Thanks for the response. Would you have happened to flow the intake @ 0.700"? Looking at the flow curve I would have to believe it would go over 300 cfm.
Stan
|
These are designed to be street heads so .600 was the logical limit.
Flow numbers would certainly increase but why advertise "street" heads that flow 400 CFM at .900 lift when no one is really going to drive their Pro Stocker back and forth to work.
I'm sure we'll do more testing at higher lifts once the CNC ported versions are out. We just wanted to show how these as cast stack up against comparable street heads.
Thanks for asking Stan.