Quote:
Originally Posted by "QUICK-SILVER"
TDC During overlap both valves will move when you work the crank back and forth a few degrees.
TDC Compression the valves don't move when you work the crank back and forth a few degrees.
Clay
|
Right. I thought I was lucky when I looked down at the timing mark and it was already near zero and the valves looked closed. Didn't have to move the crank so I didn't see any valve movement. Super confident that I was at TDC on compression. Made it so I messed with the timing way more than I should have. Wasted a LOT of time.