When I built my car back in 2012, I purchased an aftermarket core support from The Parts Place. I did not test fit it before I painted and installed it, only to find that the original core supports are built with a slight tilt forward and the aftermarket stood straight up from the mounts, causing the fender mounting holes to be way out of location. Even with the mounting bolts loosened, I couldn't pull the core support far enough forward to make it work, so I scrapped the aftermarket and rebuilt my original. I used to have pictures that I took showing the difference between the two, but I can't seem to find them on my computer and fear that I may have deleted them.
__________________
69 Judge convertible........clone! Carousel red, parchment, hideaways, TH400, 10" Continental 3200 stall, 12 bolt with 3.42, 469 c.i. with ported #48's, ported cast iron intake, Cliff's Q-Jet and ported 2-1/2" Ram Air manifolds.
|