it is not the easiest thing to do, I used to remove the passenger side inner wheel well, that makes getting at the outboard bolts & nuts a lot easier. If you have never done one before, plan on it taking an weekend, if your good it will only be 6-8 hours the 1st time. Start to finish.
But it is a straight forward job, the manual should have a good section for it as it was a common job to do back in the day.
__________________
Jeff R
60 Jaguar Mark 2, 3.8L Automatic
67 Sprint Firebird 230 OHC-6 4-Speed A/C
1971 Fiat 130 Coupe 3.2L SOHC V6, ZF 5-speed
78 Catlina Safari, Pontiac 400 powered
77 Astre Formula, 215 Buick V-8 T-5
73 Lemans Safari, 400 4bbl 4-speed
71 Catalina Enforcer, 455 4bbl
05 Dodge Magnum 3.5L SOHC V6
06 Mallet Solstice #024 LS2, Now with a Tremec 6060 6-speed!
2012 F-150 Echo Boost (My local Ford Dealer SUX!!!)
2020 Dodge Charger Scat pack (recovered)
|