[HWYSTR455]

The Accufab throttle bodies are like 2 3/4" tall, maybe less, I've had one before so know first hand. Oddly, their' website doesn't list height, but sure that's only a phone call away.

https://accufabracing.com/throttle-b...-throttle-body

You can do a low/ultra low rise intake elbow, and run an LS style TB, but you run out of room at the front of the engine, and there can still be interference. Same when you try to go to the rear or side, the side, may have issues clearing the injector rails. To the rear, it can be difficult to setup or fit an intake tube.

Just have to measure and engineer it out. It's not too hard.

.