[Formulajones]

First lets look at the #1 you posted.

That erratic and non consistent noise was found by Paul the first time. That was the distributor bushing, and the reluctor wheel was cocked so far sideways it was contacting the pickup intermittently creating that clicking sound off and on. We determined this a long while back in this thread.

The noise you have now is not the same intermittent noise. What you hear now is pre ignition on your new video, the car is idling too slow and has too much initial timing in it. We've determined that already, and Paul even told you the distributor was pulled after the dyno to check the bushing, and dropped back in before shipment, with a note stating the timing will have to be checked again. That's why I said "bingo" on that post, because it relates directly to the issue I'm trying to describe here.

I don't see anywhere yet where that has been done and verified so until that is finished with numbers and new video posted, it's pointless to guess or assume. But I'm 100% confident there isn't a problem inside that engine. Not with the cam, not with the distributor, not with the oil pump or anything related to it. Paul dotted the I's and crossed his T's going completely through it.