[64speed]

The Lunati voodoo brand and one of the Crane line of rockers body actually touch the spring when bolted down and adjusted. He sent me a pic but I can’t get it to load. The Lunati voodoo for the BBC bolt down and clear. He told me the voodoo were just reboxs of another brand I can’t remember which one. He did say they didn’t work either on Caster1s engine and he had to use BBC. Lunati is swapping them out for me and giving me 47 dollars back. The heads are brand new round ports worked over by Butler. He bolted them to a set of cast iron smog heads and they cleared fine but they will not clear the springs Butler uses. I wish for the life of me I could remember what brand he said they were reboxes of. I think it was the crane Gold Lines that hit too. Everything in my valve train is Lunati except for the springs that Butler used to build the bare head. I wanted to “keep it in the family” but if he can’t get good geometry with the BBC then I guess I will have to look elsewhere.