[HWYSTR455]

This video:

https://www.youtube.com/watch?v=25qdxORqRsI&t=1s

The first 45 seconds, they are revving the engine to like 3500, and turning the dizzy several times. That's what I'm questioning. What's the purpose of that? They rev, he reads the timing, they let it idle down, and turn the dizzy without checking the timing before they rev it again. Then the next vid, they go to start it, and it lugs during cranking. That to me says too much initial timing.

I could be wrong, but that's what it looks like to me. And I'm looking at the coil, and the same ignition 12v wire is on there, which has a spliced wire in it.

.