Quote:
Originally Posted by gtospieg
If you look at your second pic in your latest post you will see that the front seal(for the harmonic balancer) is not fully seated(it is crooked and probably not creating a good seal)...this could be the source of your leak.
|
Not sure about the seal on Joe's engine but the one I installed on my #'s matching engine looks the same as it bottomed out in the timing cover before the edge reached the surface. Mine is a reproduction timing cover so not sure if the dimensions are off or the seal is too "deep." It did not affect the seal's performance.
__________________
Will Rivera
'69 Firebird, 400/461, 290 Eddy D-Ports, HR 230/236, 4l80E, 8.5 Rear, 3.55 gears
'69 LeMans Vert, XS 350, #47 heads, TH400, 10 Bolt 3.23 gears, work in progress
‘66 Lemans, 455, 310 KRE D-Ports, HR 236/245, TH400, GV OD, 12 bolt 3.73 gears - see it here:
https://youtu.be/RP_s1wJKm_Y?si=K0NZxoTyaGcj8Dcb
|