[Stan Weiss]

Originally Posted by Jay S

Hard to beat head flow.

Good running 454 for 8.2 scr. I have read that article before. Did good for what it was.

Just got the cam last week for that engine mentioned earlier Ponjon.. So I don’t know hp or e.t. yet. Shooting for around 530 hp with the ported stock intake, qjet and ra manifolds. 6x heads are 190cc. I don’t have final flow numbers yet though. Hoping it kind of keeps up with our 510 cid pump gas 69 Charger with 10.50 scr, ported cast iron heads and a big flat tappet mech cam. The Trans Am needs to come close to 11.50 to match my brothers et in the Charger. I think it has a shot. My brother and I have had the charger since 1988.

The dished icon with the 2802 or 60243 Crower looks like a good combo to me transam474. IMHO, no reason to do the flat tops unless the heads cc’s are larger than expected.

What is the max lift from the Summit 2802? How much of that head flow is above that max lift? After looking at the head flow numbers you might want a cam for more lift.

Stan