This build will come out around 9.8-1 compression..
1970 YZ block .030 over
4.150" bore
Zero Decked
Stock N crank 010/010
Eagle H-Beam 6.625 press fit rods
Icon IC891-030 pistons 14cc dish
Butler Total Seal classic rings 4.150" drop-in
Felpro 1016 .039" head gaskets
Stock 12 heads, cc'd at 70c chamber, hardened exhaust seats, Ferrea F5143/F5144 Stainless valves, Crower 68404 springs
9.8-1 compression
Summit 2802 Camshft
Stock 1.5 rockers
Hylift-Johnson 951 lifters from Paul K
ARP rocker studs and poly locks
Stock cast iron intake
R.A. III Qjet setup with Cliffs parts and recipe
Stock points distributor recieved
TH400 transmission
Hughes GM25-BOP converter
3.55 rear gears
1970 Trans Am
Pump Gas 91 Octane
What AC plug would be good to use in this application?
__________________
1978 Trans Am
Pump Gas 461 Stroker
|