View Single Post
  #4  
Old 10-11-2019, 04:49 PM
slowride66's Avatar
slowride66 slowride66 is offline
Member
 
Join Date: Jul 2005
Location: The Beautiful Treasure Coast Florida USA
Posts: 50
Default

Hey Y'all
So I am getting into these Hideaway Headlamps there are all kinds of screwed up things going on But most importantly (because its what I don't know) is about the spring & the Actuators
the headlamp doors don't go up & they stay down.

I borrowed a smoke pot from a friend . Until I can buy my own.

Hooked up the smoke pot to the main coming off the carb ,worked the headlamp switch ,checked the canister & the actuators , & nothing. then with the grills removed I put the smoker on the top of the actuators & both leak out the shafts.

I also rigged up myself a super sucker from my A/C vacuum pump thru a old R~12 Manifold so I can test/ suck things like bleeding brakes & what not.

I was test / sucking the actuator on Pass side & it sucked up old dirty rusty crunchy water out of it.

So I am thinking they are done

Will someone please direct me to the thread or article on how to deal with these my searching has not been fruitful.

Any & all help is greatly appreciated.

SR66
Attached Thumbnails
Click image for larger version

Name:	20191010_091128.jpg
Views:	327
Size:	56.7 KB
ID:	521993   Click image for larger version

Name:	20191010_091119.jpg
Views:	406
Size:	59.6 KB
ID:	521994   Click image for larger version

Name:	20191010_204733.jpg
Views:	1530
Size:	71.5 KB
ID:	521995  

__________________
SLOWRIDE "take it easy"

https://www.robharleydetailer.com/




__________________
I'm not prejudice, I hate everyone Equally.
The best proof that there is intelligent life in outer space is;that they haven't made contact