Quote:
Originally Posted by Formulajones
That's where I'm going to start to lose interest. As more things have to be modified the costs start to go up and the difference between this and a retrofit lifter starts to come closer together.
Plus you're modifying the block beyond no return which makes it useless for stock stuff, and it's not something most here would want to convert over if it requires now taking the block to a machinist just because a guy wants a roller cam.
I'd only be interested in this type of deal if a drop in lifter can be found to be used.
|
What is the difference between reaming lifter bores to install bronze bushings to correct lifter geometry or reaming then honing a lifter bore to install larger diameter lifters? In my opinion there is none. IF someone wanted to return to the OE diameter lifters it would be a simple case of installing bronze lifter bushings to return the bore back to standard size.,