Quote:
Originally Posted by hurryinhoosier62
What is the difference between reaming lifter bores to install bronze bushings to correct lifter geometry or reaming then honing a lifter bore to install larger diameter lifters? In my opinion there is none. IF someone wanted to return to the OE diameter lifters it would be a simple case of installing bronze lifter bushings to return the bore back to standard size.,
|
The difference is that now you're talking about stripping a block, pulling the engine, and getting machine work done for anyone that wants to swap over to a roller cam that can normally be done in an afternoon. That's a huge turn off.
That's not even taking into account the added expenses.