Something I hadn’t seen until I had a set of Vpro lifters was instructions to set the lifters by turns backing off the rocker instead of setting them with feeler gauge. I could be mistaken, but I do not recall that on the vmax instructions. At least not on the older Vmaxs. Several of the guys I did cams for using Vpros had never lashed a solid cam before. Usually they choose poly lock adjustment instructions.
Sorry I haven’t had a chance to take Vpro apart. I should mention that RA 4 stroker engine I mentioned in the other thread with the vpros and the spec-8 is a current project I am helping out with. I don’t have anything to report on that one yet. Rocky flowed the heads on it. Going to be a sweet engine in a 70 Judge. I am hoping to try some bigger 1.7 or 1.8 rockers on the spec-8 with the vpros on the SPC-8. I am collecting rockers to try on it.
