[77 TRASHCAN]

Originally Posted by Tom Vaught

I have the equipment to be able to do that accurately.
It may be a while though Stan.

I can give you the info off the Cam Card info now though:
It should be really accurate as HO had a custom Camshaft Checking Tool.

Part No. HO-041-HL

Grind #s 244H336 and 253H3335
Cam Lift: .336 Intake .3335 Exhaust
.050 Duration 244 / 253
SAE Duration 306/308
(SAE Duration is at .005)
Cam Lift .317 Intake and .321 Exhaust

.050 Timing 10 BTC 54 ABC 61 BBC and 12 ATC
Nominal Timing........57 80 103 38
SAE Timing.............44 82 93 35

Lobe Separation is 113.30
Intake Centerline 112
Rocker Ratio 1.5

Tom V.

Tom, this is the cam you are planning to use in your 455(?)