Quote:
Originally Posted by Dick Boneske
Almost surely, your batter terminal connectors need to be removed and cleaned.
|
I did that prior to all this. Cleaned the battery posts and the cable ends, they are both shiny clean right now, still have the problem. There is no voltage difference from the posts to the cables, center post to center post, cable end to cable end, cable end to battery post, battery post to cable end (measuring + to -)
Thanks,
Mark
__________________
1965 GTO: 467 (Built By Dan Willever), 400 Block, Eagle 4.25 Stroke, Eagle 6.8 Rods, BRC Pistons, Custom Grind Hydraulic Roller Cam, Edelbrock 72cc Heads Ported, HS Rockers, Doug's Headers, Edelbrock Victor 4150, QTF 850 Carb, AutoGear M22 4 Speed, SPEC Clutch and Pressure Plate, 12 Bolt 3:73 Posi.
|