Quote:
Originally Posted by Bill Hanlon
That says that the battery itself is not capable of supplying the requested amount of current. Most likely a battery problem. Could be that the requested amount of current is too large (bad starter motor), but I'd definitely start with the battery. All connections are most likely good (or the system couldn't pull so much current).
|
Battery is what i am thinking. Starter is new just put in last year.
When I get the new battery, I will post if that fixed the issue.
Thanks,
Mark
__________________
1965 GTO: 467 (Built By Dan Willever), 400 Block, Eagle 4.25 Stroke, Eagle 6.8 Rods, BRC Pistons, Custom Grind Hydraulic Roller Cam, Edelbrock 72cc Heads Ported, HS Rockers, Doug's Headers, Edelbrock Victor 4150, QTF 850 Carb, AutoGear M22 4 Speed, SPEC Clutch and Pressure Plate, 12 Bolt 3:73 Posi.
|