Back in 2009 on a trip to the states I bought a 428 crank kit from star galaxy. It sat on the shelf till quite recently. I decided to assemble an engine a while ago and found I have the standard 428 pin height pistons with 6.7 rods and a 2.20 crank. As luck would have it I picked up a 428 block and crank for a good price . So now I need to buy a set of pistons to suit the 6.7 rods and crank and a set of 6.625 bushed rods. It would seem we need check our parts as soon as we get them. In my case due to the currant exchange rate it’s quite an expensive exercise
|