Quote:
Originally Posted by SR-71
If you want it to look correct don’t sand it. I used a 6” PVC pipe capped on one end and a threaded cap on the other. Degrease it drop it in and add Evaporust and cap it up. Next day take it out and use a scotchbrite pad to clean the loosened rust rinse it off and put it back in the tube. In a couple evenings it will look tremendously better and may only need polished with some 0000 steel wool. Use either Gibbs or RPM magic to keep it from flash rusting.
|
Great idea, but how much of the Evaporust did it take to fill that pipe!?!?!