I have painted quite a few int. pieces and have always used sem spray bombs. Dollar wise it is probably cheaper. You should be able to cover everything with 2 maybe 3 cans. A bit less clear if youre using that. I use the matte clear coat. I have found a lot of auto part stores carry the sem as well. I have a mom n pop type store that can get special colours in within a couple days as well, so its not that hard to find. For the metal dash you should be able to find something from rustoleum that will at least be very close. And yes, the metal should be nothing glossier than satin.
One of the tricks to spraying int. parts is to make sure they are clean! Lots of dirt, oils, armor all etc. have been applied over the years. Another thing to keep in mind is the humidity level. Only time I ever had problems, I did some spraying during the summer when the humidity level was extremely high.
|