Quote:
Originally Posted by chuckies76ta
Doesn't that Sniper EFI Need like 160 degrees before it start learning ? Also keep an eye on that high flow thermostat. Had bad luck with those sticking. I would try keeping temp around 180.
|
Yes, the Sniper needs 160 degrees to enter the learning mode. On the highway the temperature runs around 180 to 185. That is why I was considering running the #1 fan at 185 on and 180 off then fan #2 190 on and 185 off. If the thermostat is stuck it is stuck open, which could be causing some of the problems of the temperatures constantly creeping up.
Thanks for the information,
Dale