Really old thread but since there are a few new posts, I'll play...
I recently installed this setup from CVF:
https://www.cvfracing.com/stealth-bl...ic-water-pump/
I used a Meziere HD EWP (PWM controlled), bought the black CVF AC compressor to replace my Vintage Air unit, had Quality Power anodize my billet alt black and install a serpentine pulley, and bought a Lee Power Steering pump/reservoir kit.
I couldn't be happier with the kit except the 2 adjustment rods are misrepresented, they sent me silver ones. I had those and ALL of the fasteners done locally in Cerakote Elite Blackout. Came out perfect, all of their shims nailed the alignment, but I did have to get a shorter belt than the one they sent in the kit.
I went with that kit because I needed EWP support and I wanted a toned-down look, not a hot rod look.