Quote:
Originally Posted by 389
I would put the right cam in that motor for street use. It would be faster, run smoother, not destroy motor mounts and sound better.. 12" of vacuum is a lot of overlap! That power band is way too high for street use... Back when I was hard headed and the 041 in my 455 I used to hate these posts but they were right. The last motor I had I listened to Jim Hand and swapped out the 041 for the Summit 2801, WOW what a difference!!!!
|
Nah. 2801 is a towing cam in a 455.
I picked my Crane cam because it has the same duration, lift and LSA as the Wolverine cam Jim Hand favors. Good street manners and with my 3.55 gears and GM25 convertor, it has no soft spot and drives like a normal car but with a very choppy idle. Even off-idle it pulls like a freight train.