Quote:
Originally Posted by TCSGTO
.050 should be ok, you could try different preload to fine tune it if you had to.
Let us know what you find out after you get the measurements
|
Well Butler doesn’t answer tech questions on the phone at this time. I had emailed them my questions Friday. I’ll post their reply when I get it.
My 857’s measured 2.195 as best we could get it. Comp lists 2.49 so .030 difference. Butler lists HyLift Johnson as 2.71 seat height.
In searching through the many threads on hyd rollers, I saw Dave Bisschop posted they were with in .010 new to old Comps.
I guess the thing to do is just order the Comps & see how close they are.
Thanks
Murf
Sent from my iPhone using Tapatalk Pro