Quote:
Originally Posted by Lee
One more question: Has anyone checked the springs on the HR version? Is .580" actually the max lift these can (safely) handle? I'm guessing a 1.800" IH?
|
Below is the response I got from Speedmaster on the springs.
They were installed at 1.800. They checked around 165lbs on the seat.
Mike,
Below are the specifications of the springs:
Number of Springs Per Valve: Dual
Outside Diameter of Outer Spring (in): 1.450 in.
Coil Bind Height (in): 1.060 in.
Damper Spring Included: No
Spring Rate (lbs/in): 135lbs @ 1.900 in.
Inside Diameter of Outer Spring (in): 1.080 in.
Inside Diameter of Inner Spring (in): .834 in.
Thanks Speedmaster Products