View Single Post
  #9  
Old 02-20-2021, 02:13 PM
steve25's Avatar
steve25 steve25 is offline
Ultimate Warrior
 
Join Date: May 2008
Location: Westchester NY
Posts: 17,520
Default

I must be honest by saying that I am not impressed!

Here’s a dyno test of a 364 cid SBC with Trickflow heads that I ported up to 260 cfm.
The motor had 10.25 compression and a Crower cam.

Two flat tappet hydro cams where tested .
The final cam as used in this test made 9 more ft lbs of torque and 17 more hp.
The cam specs where 220/226
Cam Lift .462” .470”
1.6 rockers where used and the cam was advanced from 112 to 109.
A 700 Holley was used on top a Victor jr manifold that I had blended the plenum on and gasket matched,
Attached Thumbnails
Click image for larger version

Name:	94CA441C-34E4-489C-A7AA-364F2F74087E.jpg
Views:	1869
Size:	70.0 KB
ID:	561179   Click image for larger version

Name:	1196F542-6F69-4A95-809B-B718DAABACAD.jpg
Views:	1631
Size:	58.3 KB
ID:	561180  

__________________
Wernher Von Braun warned before his retirement from NASA back in 1972, that the next world war would be against the ETs!
And he was not talking about 1/8 or 1/4 mile ETs!

1) 1940s 100% silver 4 cup tea server set.

Two dry rotted 14 x 10 Micky Thompson slicks.

1) un-mailed in gift coupon from a 1972 box of corn flakes.
Two pairs of brown leather flip flops, never seen more then 2 mph.

Education is what your left with once you forget things!

Last edited by steve25; 02-20-2021 at 02:23 PM.
The Following User Says Thank You to steve25 For This Useful Post: