Nice looking Intake Tom S.
Quote:
Originally Posted by mysticmissle
no fuel in a modern intake as they use port efi to deliver the gas
|
You do not get the wall wetting as much with EFI vs with a carb BUT you still get some fuel reversion back up the runners to the plenum, even with EFI.
This info is based in inserting a camera inside the plenum of the intakes we tested in Research.
You also get water condensation (from the cool air from the intercooler (before the throttle body and the plenum/runners at some rpm points). That condensation of water typically finds the closest intake runner and is drawn into that runner at some cruising speeds. A bit of rpm changer or a different rpm point and the water is absorbed back into the fresh air charge and the water disappears.
Tom V.
__________________
"Engineers do stuff for reasons" Tom Vaught
Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward.
Last edited by Tom Vaught; 03-04-2021 at 04:38 PM.
|