Does the '63 use a bracket to mount the front license plate? The previous owner of my car just had the plate attached to the upper two screws of the valence, but since there are also lower screws that are spaced closer together, I'm assuming there should be a bracket to mount it properly.
Just found this picture - looks like the bracket just attaches to the lower holes. I can probably make something to work, but would prefer a correct piece if possible.
__________________
Hoping to finish a project while I'm still able to push the clutch in....
1963 Tempest Convertible (Ram Air IV w/4” stroke), TKX, 9-inch w/3.70 gears and triangulated 4-link)
Pictures