Quote:
Originally Posted by FrankieT/A
I used Inline Tube 1/2" stainless steel supply and 3/8 return. They are already pre bent and fit right where the original line was. I'm using a Tanks Inc. tank with a Walbro fuel pump and an FITech 1200 Power Adder (which I am about to sell), the point is I have a similar set up as what you are about to do.
|
& the 3/8 return works ok? i always hear the return has to be the same size as the feed line. going pre bent metal lines seems to be the better way & if a 3/8 return is ok that makes it even easier.